Cookie Img
Back to top
Home » Products » Power Adapter » 12V 3.5Amp Power Adapter

12V 3.5Amp Power Adapter

12V 3.5Amp Power Adapter
12V 3.5Amp Power Adapter
Product Code : JP-12B-8000
Brand Name : TIANCHANG JINPENG
Product Description

Our enterprise is the most reliable and trustworthy which is exclusively engaged in offering a wide assortment of 12V 3.5Amp Power Adapter. The offered power adapter is highly praised in the market for its superior finish & high strength. This power adapter is manufactured using optimum quality material in adherence with market norms. Our offered 12V 3.5Amp Power Adapter can be availed from us in various specifications at affordable price in the market.

Specifications :-








outputdc voltage12V
rate current3.5A
Current Range0-3.5A
Rated Power42W
Ripple & Noise (max.)<80mV
Voltage Tolerance±0.5
Setup,Rise time1000ms, 30ms at full load
Hold time20ms at full load
inputVoltage Range88 ~ 132VAC/176 ~ 264VAC 
Frequency Range47~63HZ
Efficiency80%
AC Current0.4A/115VAC         0.2A/230VAC
Leakage Current<1mA / 240VAC
protectionOver Load105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed

Over Voltage 

(v*0.9+v*0.25---v*1.1+v*0.25)

Protection type : Hiccup mode, recovers automatically after fault condition is removed
environmentWorking Temperature-10 ~ +60°c (Refer to "Derating Curve" )
Working Humidity20~90% RH  Non-condensing
Storage temp.& humidity-20~+85°C, 10~95%RH
Temp. coefficient±0.03%/°C (0~50°C)
Vibration10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
safetyCEFCCCCCULKCTUVSAA

EN55022

EN61000

EN55024

EN60950

class B,FCC part 15

GB4943

GB9254

GB17625

UL60950K60950BS EN 60950AS-NZS60950
othersMTBFDimensionweightPackingGW/setGW/cartonsets/carton
50000 hours114*47*33mm0.21kgsmall white box/PE bag0.22kg16kg50sets
note1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.